[Analysis] Appointment Letter Format under the Labour Codes – Mandatory Particulars | Salary Annexure | Clauses to Redraft
- Blog|Labour & Industrial Laws|
- 13 Min Read
Rule 6 of the Central OSHWC Rules makes an appointment letter mandatory. What the format asks for, what the annexure should show and the clauses to redraft.
- By Taxmann
- |
- Last Updated on 16 November, 2026

Table of Contents
- Is there a prescribed appointment letter format, and is a letter mandatory?
- What should the appointment letter and the salary annexure each cover?
- Why should the salary annexure not be only a CTC sheet?
- How should the wage period and the payment date be worded?
- What should the exit clause say?
- Working hours and overtime: what goes in the letter and what in the policy?
- How should the deduction clause be drafted?
- Which clauses in old appointment letters need review?
- How should salary clauses be redrafted?
- Which policies and records follow the letter?
- Quick answers
1. Is there a prescribed appointment letter format, and is a letter mandatory?
Yes to both for Central sphere establishments, and the appointment letter format comes from the rules under another Code. Rule 6 of the Occupational Safety, Health and Working Conditions (Central) Rules, 2026 (the Central OSHWC Rules) states that no employee shall be employed in any establishment unless an appointment letter is issued, and the format referred to in that rule asks for the employee’s name, date of birth, parent’s name, Aadhaar number after consent, the establishment’s labour identification number, the UAN or insurance number where available, designation, type of employment, skill category, date of joining, wage or basic wage and dearness allowance, other allowances including accommodation wherever applicable, applicability of social security benefits, the broad nature of duties, maternity benefits for female employees and any other information (para 15.2).
What the letter says should then be consistent with the Code on Wages, 2019: the wage period, the payment timeline, authorised deductions, overtime, statutory bonus and the wages payable on exit. Taxmann’s HR Guide to Code on Wages makes the point in one line: “many wage disputes begin not in payroll software, but in unclear employment documents” (para 15.1).
It is also not a document for factory staff alone. Section 2(k) of the Code defines an employee in broad terms, covering skilled, semi-skilled, unskilled, manual, operational, supervisory, managerial, administrative, technical and clerical work, subject to the exclusions in the Code, and the Additional FAQ dated 16 March 2026 clarifies that the timely payment provisions apply to all employees, including white-collar employees (paras 15.2 and 30.6). A letter that mentions only designation and CTC is the book’s mistake 23 (para 28.25).
State sphere establishments must check the corresponding State Rules, minimum wage notifications, Shops and Establishments requirements and local formats (para 15.1). For that check, Taxmann.com | Premium brings Research, Practice and Learning under one search.
2. What should the appointment letter and the salary annexure each cover?
Between them, the legal terms of employment and the detailed salary break-up, without contradicting each other. In many organisations the letter says “salary as per company policy” while the annexure shows a CTC structure with several components. That may be convenient, but it is not enough for wage compliance (para 15.3). Together the two documents should answer eleven questions:
| Area | What the document should clarify |
|---|---|
| Employer and establishment | Legal name of the employer, place of posting, department and location |
| Employee identity | Name, date of birth, employee code, identification and contact details |
| Employment type | Regular, fixed-term, probationer, trainee, contractual or other category |
Three of the eleven areas are shown here. The full list is in para 15.3 of the book, and Chapter 30 adds a fifteen-area appointment letter checklist at para 30.6.
The rest cover the role and skill category, the wage period, salary components, working time, payment mode, deductions, benefits and exit. The letter should not try to override the Code. A clause saying overtime is included in salary may not protect the employer where section 14 applies, and a clause allowing the company to deduct any amount at its discretion is not aligned with section 18, which permits only the deductions the Code authorises (para 15.3).
3. Why should the salary annexure not be only a CTC sheet?
Because it should help the employee understand what is payable monthly, what is an employer contribution, what is a reimbursement, what is variable and what is a statutory or policy-based benefit (para 15.4). If the employee sees a CTC of Rs. 10,00,000 but receives a monthly salary built on a different structure, disputes may arise unless the annexure explains the difference.
Section 2(y) shapes the drafting. Wages include basic pay, dearness allowance and retaining allowance, if any; specified components are excluded, subject to the 50% add-back rule; and remuneration in kind is recognised within the statutory limit. So the annexure should be written in a way that supports component classification (para 15.4):
| Salary item | Treatment in the annexure |
|---|---|
| Basic pay | Show clearly as a monthly earning |
| Dearness allowance | Show separately if applicable |
| Retaining allowance | Show separately if applicable |
Three of the thirteen rows are shown here. The full table is in para 15.4 of the book, with a further salary annexure checklist at para 30.7.
The pattern across the rest is the same: a special allowance should not be an unexplained balancing figure, employer PF and ESI go under employer contribution, the gratuity provision and insurance premiums are shown as a statutory benefit or provision, and statutory bonus and variable incentive are shown separately. The annexure should not mix cash salary, employer contribution and notional benefits under one heading (para 15.4). How the components themselves are built is covered in new labour code salary structure.
4. How should the wage period and the payment date be worded?
Plainly, and with the statutory timeline rather than an internal practice. Section 16 requires the employer to fix the wage period as daily, weekly, fortnightly or monthly, and no wage period may exceed one month. Section 17 sets the time limits: daily wages at the end of the shift, weekly wages on the last working day of the week, fortnightly wages before the end of the second day after the fortnight ends, and monthly wages before the expiry of the seventh day of the succeeding month (para 15.5).
The book’s model wording for a monthly wage period reads:
“Your wage period shall be monthly. Salary shall ordinarily be processed and paid by bank transfer on or before the seventh day of the succeeding month, subject to statutory requirements and payroll cut-off timelines.”
For daily or weekly wage establishments the wording has to change, and the book warns against using one standard corporate letter for every category (para 15.5). The wage slip itself is covered in wage slip format under the Code on Wages.
5. What should the exit clause say?
That wages payable on exit follow the statutory timeline, separately from everything else in the settlement. Section 17 requires wages payable on removal, dismissal, retrenchment, resignation or unemployment due to closure to be paid within two working days, while HR clearance, asset return and finance verification may take longer (para 15.6). The obligation cannot be held back indefinitely because internal clearance is pending.
The book’s answer is to split the exit settlement into three parts (para 15.6):
| Item | Practical treatment |
|---|---|
| Wages earned up to the last working day | Identify and pay within the statutory timeline |
| Recoveries legally permitted | Recover only if authorised under law, contract and policy |
| Non-wage settlements | Process according to applicable law, policy and documentation |
In the book’s example, an employee resigns on 10 July and is relieved the same day. Earned wages up to 10 July should not be held for weeks because the laptop return is pending; an asset loss or loan recovery has to be separately supported and recovered only within the framework of section 18 and related provisions (para 15.6). The letter may say that wages payable on exit will be paid within the statutory timeline and that lawful recoveries may be adjusted subject to the Code and company policy. The timeline is set out in full and final settlement under the Code on Wages.
6. Working hours and overtime: what goes in the letter and what in the policy?
The letter carries the normal working hours and the overtime principle; the detail belongs in the attendance and overtime policy. Section 13 allows the appropriate Government, where minimum wages have been fixed, to fix the hours that constitute a normal working day, including intervals and rest day provisions, and section 14 requires overtime at not less than twice the normal rate of wages where an employee whose minimum rate of wages has been fixed works beyond it. For Central sphere establishments, rule 5 of the Wages (Central) Rules, 2026 provides that where the wage period is daily the normal working day is eight hours, and that for other wage periods total working hours should not exceed forty-eight in a week (para 15.7).
The appointment letter need not reproduce the overtime law, but it should not contradict it (para 15.7). The policy should cover:
| Policy point | Why it matters |
|---|---|
| Normal working hours | Supports attendance and overtime calculation |
| Weekly working hours | Supports weekly compliance |
| Shift timing | Supports shift payroll and night shift working |
Three of the eight policy points are shown here. The rest cover the rest interval, the weekly rest day, overtime approval, the overtime rate and record keeping (para 15.7).
A policy should not say that no overtime is payable to any employee in any circumstances. A better approach is to classify categories properly and provide that overtime will be paid wherever it applies under law and policy, subject to authorised work and attendance records (para 15.7). The calculation is covered in overtime rules under the Code on Wages.
7. How should the deduction clause be drafted?
As a reference to what the law authorises, not as a general right of recovery. Section 18 provides that there shall be no deduction from wages except those authorised under the Code, and it treats a payment made by an employee to the employer or his agent as a deduction from wages, so recoveries taken outside payroll may also be questioned if they are effectively wage deductions. Total deductions in any wage period cannot exceed fifty per cent of wages (para 15.8).
The book’s model clause reads:
“Statutory deductions and other authorised deductions, including recovery of advances, loans, notice pay, asset loss or other amounts lawfully recoverable, may be made from wages subject to the Code on Wages, 2019, applicable rules, company policy and the employee being given an opportunity wherever required by law.”
That wording is safer than a broad clause giving absolute discretion (para 15.8). Two groups of clauses need a process behind them. Fines under section 19 require the acts and omissions to be approved and displayed as prescribed, with an opportunity to show cause. Deductions for damage or loss under section 21 cannot exceed the loss caused by the employee’s negligence or default, again with an opportunity to show cause and an entry in the prescribed register (para 15.9). If a field employee loses a company tablet, HR should first check entrustment, negligence or default, whether the employee was heard, whether insurance applies and whether the recovery is within the deduction ceiling.
Salary advances and employee loans sit under sections 18, 23 and 24. Section 23 covers the recovery of advances, including advances of wages not already earned, subject to conditions; section 24 covers deductions for the recovery of loans, with their extent and interest regulated as prescribed (para 15.10). The book’s advice is to avoid informal cash advances, and to state the eligibility, approval authority, repayment schedule, interest if any, deduction consent, maximum limit and treatment on exit in the policy. The limits are set out in deductions from wages and the 50% limit.
8. Which clauses in old appointment letters need review?
The ones drafted to give the employer room that the Code does not give. The book lists seven common examples with the risk in each and the approach it suggests (para 15.15):
| Old clause type | Risk | Suggested approach |
|---|---|---|
| “Salary includes all overtime” | May conflict with the overtime entitlement where section 14 applies | State that overtime will be paid where applicable under law and policy |
| “Company may deduct any amount from salary” | Too broad and inconsistent with section 18 | Limit deductions to those authorised by law, contract and policy |
| “Full and final settlement will be done within 45 days” | May conflict with the two-working-day wage payment requirement under section 17 | Separate wages payable on exit from other settlement items |
| “Special allowance may be adjusted at company discretion” | May weaken wage classification | Define each component clearly |
| “Bonus is discretionary” | May conflict with the statutory bonus entitlement where applicable | Separate statutory bonus from discretionary incentive |
| “Employee will bear all losses caused to the company” | Too broad | Apply the section 21 process for negligence or default |
| “Management decision is final in all payroll matters” | May not withstand statutory claims | Preserve statutory rights and provide an internal grievance process |
The object is not a longer appointment letter but one that is legally aligned and operationally clear (para 15.15). Bonus deserves its own line in the annexure: section 26 provides annual minimum bonus for an eligible employee drawing wages up to the notified amount who has worked at least thirty days in the accounting year, subject to the provisions of the Code, while a performance incentive is governed by the incentive plan. The Additional FAQ clarifies that annual performance-based incentives do not form part of wages for computation under the Labour Codes, but, as the book notes, if an amount is fixed, assured and paid monthly, calling it an incentive may not be enough (para 15.12).
9. How should salary clauses be redrafted?
By naming the parts instead of the total. The book’s first example replaces “Your CTC is Rs. 12,00,000 per annum as per company policy” with a clause that states the annual cost to company, refers to the structure in the annexure, and separately identifies monthly earnings, employer contributions, statutory benefits, reimbursements and variable pay (para 15.16).
Its second example deals with revision. Instead of “The company may revise salary structure at any time”, the suggested clause reads:
“The company may revise the salary structure from time to time for business, statutory, payroll or policy reasons, provided that such revision shall be communicated to the employee and shall not reduce wages below the applicable statutory minimum.”
The third replaces “Any excess payment may be recovered from salary” with a clause tying recovery of an excess payment, advance or loan to applicable law, company policy and the deduction limits under the Code on Wages, 2019 (para 15.16). Good drafting, the book says, reduces future disputes. Where the revised clauses have to be drafted against the current text of the law, Taxmann AI, a legal research and drafting assistant that answers questions against the law, can be asked the specific question.
10. Which policies and records follow the letter?
Twelve, by the book’s mapping (para 15.14):
| HR policy | Wage Code impact |
|---|---|
| Appointment letter template | Must capture employment type, wage details, duties, benefits and statutory alignment |
| Salary structure policy | Must align with section 2(y), minimum wages and the 50% rule |
| Attendance policy | Must support the wage period, absence deduction and overtime calculation |
Three of the twelve policies are shown here. The full mapping is in para 15.14 of the book, and Chapter 30 gives a checklist for most of them. A policy that employees and managers do not understand will not work during implementation (para 15.14).
The others cover overtime, leave, reimbursement, loans and advances, assets, discipline, bonus and incentive, exit and contractors. Two are worth singling out. A reimbursement paid every month without bills is safer treated as an allowance, because the name of a component should match its nature (para 15.11). And the documents should be gender neutral unless a specific legal requirement applies, since section 3 prohibits discrimination on the ground of gender in wages for the same work or work of a similar nature, and on the ground of sex in recruitment for such work, except where the employment of women in that work is prohibited or restricted by law (para 15.13).
Contractor documentation follows the same logic. Wage compliance clauses in the contractor agreement should require the contractor to comply with the Code on Wages, maintain wage records, submit monthly compliance documents, permit inspection and indemnify the principal employer, and the invoice alone is not enough (para 15.18). That file is covered in principal employer and contractor wage compliance.
The rollout itself is a thirteen-step checklist (para 15.20):
| Step | Action |
|---|---|
| 1 | Identify Central sphere or State sphere applicability |
| 2 | Review the existing appointment letter template |
| 3 | Compare it with the appointment letter particulars under the applicable OSHWC Rules |
Three of the thirteen steps are shown here. The full checklist is in para 15.20 of the book.
The steps that follow run through the salary annexure, the wage period, the overtime, attendance and leave policies, deduction and recovery clauses, bonus, the exit policy, contractor agreements, payroll configuration, employee communication and the preservation of earlier and revised versions for the audit trail. The letter should also refer to the employee handbook and key policies, though a signed acknowledgement is not a route to an unauthorised deduction: even with broad consent, a deduction must still be permitted under section 18 (para 15.17). Where the revised policies have to become written SOPs and the payroll rules have to be configured in the ERP, Taxmann Advisory offers implementation support, including compliance SOPs and ERP automation for compliances.
11. Quick answers
Is an appointment letter mandatory in India?
Rule 6 of the Occupational Safety, Health and Working Conditions (Central) Rules, 2026 states that no employee shall be employed in any establishment unless an appointment letter is issued. State sphere establishments should check the corresponding State Rules and local requirements.
What should an appointment letter format contain?
The format referred to in rule 6 of the Occupational Safety, Health and Working Conditions (Central) Rules, 2026 asks for the employee’s name, date of birth, parent’s name, Aadhaar number after consent, the establishment’s labour identification number, the UAN or insurance number where available, designation, type of employment, skill category, date of joining, wage or basic wage and dearness allowance, other allowances including accommodation wherever applicable, applicability of social security benefits, the broad nature of duties, maternity benefits for female employees and any other information.
Where does the appointment letter format come from?
For Central sphere establishments it comes from rule 6 of the Occupational Safety, Health and Working Conditions (Central) Rules, 2026. What the letter says should be consistent with the Code on Wages, 2019: the wage period under section 16, the payment timeline under section 17, authorised deductions under section 18, overtime under section 14, statutory bonus under section 26 and the wages payable on exit.
Can an appointment letter say that overtime is included in the salary?
Taxmann’s HR Guide to Code on Wages treats that clause as risky. It may conflict with the overtime entitlement where section 14 of the Code on Wages, 2019 applies, and the suggested approach is to state that overtime will be paid where it applies under law and policy.
Can an appointment letter allow the company to deduct any amount from salary?
No. Section 18 of the Code on Wages, 2019 permits only the deductions the Code authorises, and total deductions in a wage period cannot exceed fifty per cent of wages. The clause should limit deductions to those authorised by law, contract and policy.
What should the salary annexure show?
Under the Code on Wages, 2019 the annexure should help the employee understand what is payable monthly, what is an employer contribution, what is a reimbursement, what is variable and what is a statutory or policy-based benefit. Taxmann’s HR Guide to Code on Wages shows basic pay, dearness allowance and any retaining allowance separately, employer PF under employer contribution, the gratuity provision as a statutory benefit or provision, and statutory bonus separately from performance incentive.
What should the exit clause say about final settlement?
That wages payable on exit will be paid within the statutory timeline. Section 17 of the Code on Wages, 2019 requires wages payable on removal, dismissal, retrenchment, resignation or unemployment due to closure to be paid within two working days, and lawful recoveries should be dealt with separately under the Code and company policy.
This article draws on Chapter 15 of Taxmann’s HR Guide to Code on Wages by CA Venugopal Gella (2026 Edition), which sets out the impact of the Code on appointment letters, salary annexures and HR policies with model clauses, a list of old clauses that need review and a thirteen-step implementation checklist, and on the appointment letter and salary annexure checklists in Chapter 30. Law stated as updated till August 2026. The wider position across all four labour codes is covered in Taxmann’s Employer-Employee’s Guide to New Labour Laws.
Labour law Acts and Rules, case laws, circulars and notifications are available on Taxmann.com | Research under Labour Laws.
Related reading: the complete guide to the Code on Wages, 2019 · definition of wages and the 50% rule · the complete guide to the OSHWC Code, 2020.
More in this series: full and final settlement under the Code on Wages · wage slip format under the Code on Wages · statutory bonus calculation · new labour code salary structure · deductions from wages and the 50% limit · payment of wages: wage period and time limits · overtime rules under the Code on Wages · minimum wages as per the new labour code · principal employer and contractor wage compliance · 34 common payroll mistakes · monthly payroll compliance · labour code implementation roadmap.
Disclaimer: The content/information published on the website is only for general information of the user and shall not be construed as legal advice. While the Taxmann has exercised reasonable efforts to ensure the veracity of information/content published, Taxmann shall be under no liability in any manner whatsoever for incorrect information, if any.

Taxmann Publications has a dedicated in-house Research & Editorial Team. This team consists of a team of Chartered Accountants, Company Secretaries, and Lawyers. This team works under the guidance and supervision of editor-in-chief Mr Rakesh Bhargava.
The Research and Editorial Team is responsible for developing reliable and accurate content for the readers. The team follows the six-sigma approach to achieve the benchmark of zero error in its publications and research platforms. The team ensures that the following publication guidelines are thoroughly followed while developing the content:
- The statutory material is obtained only from the authorized and reliable sources
- All the latest developments in the judicial and legislative fields are covered
- Prepare the analytical write-ups on current, controversial, and important issues to help the readers to understand the concept and its implications
- Every content published by Taxmann is complete, accurate and lucid
- All evidence-based statements are supported with proper reference to Section, Circular No., Notification No. or citations
- The golden rules of grammar, style and consistency are thoroughly followed
- Font and size that’s easy to read and remain consistent across all imprint and digital publications are applied


CA | CS | CMA