[Analysis] Full and Final Settlement under the Code on Wages 2019 – Two-Working-Day Rule | Trigger Dates | Exit Workflow
- Blog|Labour & Industrial Laws|
- 13 Min Read
Section 17 of the Code on Wages 2019 requires wages payable on exit to be paid within two working days. Trigger dates, what to pay first and the exit workflow.
- By Taxmann
- |
- Last Updated on 16 November, 2026

Table of Contents
- What does the Code on Wages require when an employee leaves?
- Is full and final settlement the same as wages payable?
- When do the two working days start?
- How should working days be counted?
- What must be paid within two working days, and what can follow?
- How do resignation, dismissal, retrenchment, closure, death and absconding differ?
- Which recoveries can be made from the final settlement?
- How should overtime, leave encashment, bonus and gratuity be handled?
- What does a two-working-day exit workflow look like?
- What happens if the settlement is delayed?
- Quick answers
1. What does the Code on Wages require when an employee leaves?
It requires the wages payable on exit to be paid within two working days. Section 17 of the Code on Wages, 2019 deals with the time limit for payment of wages. For the regular wage periods it sets separate timelines for daily, weekly, fortnightly and monthly payment, and for a monthly wage period the wages must be paid before the expiry of the seventh day of the following month.
The exit rule sits apart from those timelines. Where an employee has been removed, dismissed or retrenched, has resigned from service, or has become unemployed because the establishment has closed, the wages payable must be paid within two working days of that separation event. The Compliance Handbook for Employers under the Four Labour Codes, published on the Ministry of Labour and Employment’s website, puts the same requirement in employer-facing terms: when an employee leaves, whether by resignation, dismissal or termination, the employer has to pay all due wages within two working days.
Taxmann’s HR Guide to Code on Wages describes this as a major change in payroll discipline (para 17.2). Many employers settle exits in the next salary cycle. The book gives the pattern it warns against: an employee relieved on 10 June and paid the full and final amount on 7 July (para 28.9). Waiting for the next monthly run can create non-compliance, so an employer that settles exits this way needs a separate exit payroll.
2. Is full and final settlement the same as wages payable?
No. In HR usage, full and final settlement covers every amount payable to and recoverable from an employee on exit. Section 17 uses a narrower expression, “wages payable”, and only that part carries the two-working-day deadline. The rest of the settlement may be governed by other laws, company policy, scheme terms or the supporting documents.
The book separates the items like this (para 17.3):
| Item | Treatment in the full and final settlement |
|---|---|
| Earned wages up to the last working day | Prioritised under the two-working-day wage payment discipline |
| Unpaid wage arrears | Included if already due and determinable |
| Overtime wages | Included if earned and payable |
| Leave encashment | Governed by the applicable law and leave policy |
| Statutory bonus | Governed by Chapter IV of the Code and its payment timeline |
| Gratuity | Governed by social security or gratuity provisions |
| Retrenchment compensation | Governed by industrial relations law |
| Reimbursements | Governed by reimbursement policy and claim approval |
| Performance incentive or variable pay | Governed by scheme terms |
| Notice pay recovery | Governed by appointment terms, policy and deduction rules |
| Loan or advance recovery | Governed by the agreement, records and deduction limits |
| Asset recovery | Governed by proof, process and the damage or loss rules |
The working rule that follows from the table is simple. If an amount is clearly wages payable and can be computed, pay it within two working days. Do not hold it because a non-wage item is still being checked.
3. When do the two working days start?
In practice, from the date on which employment actually ceases or the separation takes effect, not from the date of the resignation letter. The Code refers to the separation event, and the book treats the effective cessation date as the safer and more practical starting point (para 17.4).
| Separation situation | Practical trigger date |
|---|---|
| Resignation with notice period | Last working day or effective relieving date |
| Immediate resignation accepted | Date on which immediate relieving takes effect |
| Resignation with notice buyout | Effective relieving date |
| Removal | Effective date of the removal order |
| Dismissal | Effective date of the dismissal order |
| Retrenchment | Effective date of retrenchment |
| Closure-related unemployment | Date on which the employee becomes unemployed due to closure |
| Death | Date of death, with payment to the nominee or legal heir subject to documentation |
| Absconding or abandonment | Effective cessation date determined after due process |
Two of the book’s examples show the difference (para 17.29). An employee who resigns on 1 June with a thirty-day notice period stays in service until 30 June, so the two working days run from 30 June or the effective relieving date. Where an employee resigns on 10 June and the company accepts immediate relieving the same day, the wages payable should be paid within two working days from 10 June.
Much of the confusion on this point comes from records. HR, the reporting manager and payroll do not always hold the same date for the same exit. The effective date should be frozen once and put on file. Where an exit does not fit any row of the table, the specific question can be put to Taxmann AI, a legal research and drafting assistant that answers questions against the law.
4. How should working days be counted?
By a definition written into the payroll and exit SOP. The Code uses the expression “working days”, and the book’s advice is that HR should define it for the establishment (para 17.5). As a practical control, weekly holidays and declared holidays of the establishment may be excluded, and the count should follow the days on which the payroll and finance function normally operates.
The book works one example. If the last working day is a Friday and Saturday is a working day, Saturday may be the first working day and Monday the second, assuming Sunday is the weekly off and Monday is not a holiday. If both Saturday and Sunday are weekly offs, the second working day may be Tuesday, assuming Monday and Tuesday are working days.
If the second working day is a bank holiday, pay earlier wherever possible. The purpose of the rule is timely payment, not a technical postponement.
5. What must be paid within two working days, and what can follow?
At a minimum, the wages payable up to the effective date of cessation. According to the book, this would generally include earned salary up to the last working day, unpaid wages from earlier wage periods, overtime already earned and determinable, wage arrears already due, and allowances that form part of wages for the period (para 17.6).
These amounts should not wait for leave encashment, gratuity, bonus, reimbursements or incentives to be verified. Where practical, all dues may be settled together. If not, pay wages first and track the rest.
| Category | Settlement priority |
|---|---|
| Earned wages and wage arrears | Pay within two working days |
| Approved overtime wages | Pay within two working days if determinable |
| Leave encashment | Pay as per applicable law and policy, preferably with the settlement |
| Statutory bonus | Track and pay as per the Code’s timeline and eligibility |
| Gratuity | Process under the applicable social security or gratuity provisions |
| Reimbursements | Pay after claim verification |
| Performance incentive | Pay as per scheme terms |
| Retrenchment compensation | Process under industrial relations law |
| Recoveries | Deduct only if legally and contractually supported |
The same split should show on the settlement statement, so that the employee can see what has been paid and what is still in process.
6. How do resignation, dismissal, retrenchment, closure, death and absconding differ?
The two-working-day rule applies to the wages payable on each separation event named in section 17, and the book also gives death and absconding a practical trigger date (para 17.4). What changes is the preparation, and the book gives each exit its own treatment:
| Exit | What to watch |
|---|---|
| Resignation | Start when the resignation is received, not after the last working day. With full notice, check attendance, leave, assets, loans, advances and reimbursements before relieving. A short-notice exit adds a notice pay computation that must be supported by the appointment letter and policy (para 17.7). |
| Resignation withdrawn | If the employer accepts the withdrawal before cessation, there is no settlement to run. Document the withdrawal (para 17.7). |
| Removal or dismissal | Section 17 does not permit earned wages to be delayed merely because the separation is disciplinary. Recoveries only as deductions authorised by the Code and supported by records, never as an informal punishment (para 17.8). |
| Retrenchment | Compensation and notice pay under industrial relations law; wages payable under section 17. Prepare the settlement before the retrenchment takes effect wherever possible, and do not communicate first and compute later (para 17.9). |
| Closure | Plan in advance: employee and contract labour lists, wages payable up to the closure date, compensation, leave encashment, bonus, gratuity, statutory contributions, loans, assets, bank details and records. For State sphere establishments, check closure procedures under State rules separately (para 17.10). |
| Death | Pay the nominee, legal heir or claimant, depending on the nature of the amount and the records available. Collect and preserve the death certificate, nomination records, legal heir documents where required, the claimant’s identity and bank details, an internal approval note and payment proof (para 17.11). |
| Absconding | Record the absence, send notices, follow the disciplinary or abandonment process and fix the cessation date. Then pay the wages payable after only lawful deductions, retaining them only where legally justified (para 17.12). |
7. Which recoveries can be made from the final settlement?
Only those the Code authorises, within the section 18 ceiling, and each one supported by documents. Section 18 permits deductions only as authorised under the Code, and total deductions in a wage period cannot exceed fifty per cent of wages (para 17.17). The book’s checklist of what to verify before each recovery:
| Recovery type | Documents to verify |
|---|---|
| Notice pay recovery | Appointment letter, policy, last working day and waiver status |
| Salary advance | Advance request, approval, payment proof and recovery schedule |
| Employee loan | Loan agreement, outstanding statement and repayment terms |
| Excess salary paid | Payroll error working and communication with the employee |
| Asset loss or damage | Asset issue record, valuation, show cause and decision |
| Leave without pay | Attendance and leave records |
| Statutory deductions | Applicable law and payroll computation |
| Canteen, transport or accommodation dues | Policy, usage records and employee authorisation |
Where the amount to be recovered is more than the deduction limit allows, the excess should not be forced out of wages unless the law permits it. The balance may need to be recovered separately, under the contract and the law.
Notice pay recovery is common, but it should not be mechanical. Before recovering notice pay, check the appointment letter, the notice clause, whether the resignation was accepted, the last working day, whether part of the notice was served, whether the employer waived it, and whether the early release was at the employer’s request (para 17.18). If the company itself relieves an employee early for its own convenience, full notice pay recovery may be difficult to justify unless the terms clearly support it. The exit policy should also state the base for notice pay, whether gross salary, basic salary, wages or another defined amount, because ambiguity in that clause often leads to disputes.
For assets, section 21 governs deductions for damage or loss. The deduction cannot exceed the loss caused to the employer by the employee’s neglect or default, the employee must be given an opportunity to show cause, and the deduction must be recorded in the prescribed register (para 17.20). If a laptop has not come back, the employer may first seek its return. If it is lost, the asset issue record, the employee’s explanation, the actual loss, depreciation, any insurance recovery and the deduction limits all come into the decision. Holding the entire earned wage while this plays out is the error the book warns against (para 28.11).
8. How should overtime, leave encashment, bonus and gratuity be handled?
Each needs a separate check, and none of them should be forgotten because the employee has left.
Overtime. Section 14 requires overtime to be paid where an employee whose minimum rate of wages has been fixed works beyond the hours of a normal working day. The Additional FAQ dated 16 March 2026 clarifies that an employee, including a worker, whose minimum rate of wages is fixed under the Code is eligible for overtime. Approved and payable overtime belongs in the settlement, and pending approvals should be resolved against the attendance record, shift roster and supervisor approval rather than ignored (para 17.13).
Leave encashment. This depends on the applicable working conditions law, State rules and the company’s leave policy. The statement should say plainly whether leave encashment is payable, not payable, or payable later after verification (para 17.14).
Bonus. Section 26 provides annual minimum bonus for eligible employees who draw wages up to the notified amount and have worked for at least thirty days in the accounting year, subject to the provisions of the Code. A resigned employee may still be eligible. In the book’s example, an employee who resigns on 31 December after working more than thirty days in the accounting year may still be owed statutory bonus, and if the annual computation is pending the statement should show it as payable later as per law (paras 17.15 and 17.29). Payroll should keep a tracker of resigned employees so they are not missed in the annual bonus run. The computation itself is covered in statutory bonus calculation under the Code on Wages.
Gratuity. The Additional FAQ states that gratuity based on the revised definition of wages applies from 21 November 2025, and that a fixed-term employee is eligible for gratuity if service is rendered under the contract for one year from the start of the contract. Gratuity may run on its own statutory timeline, but it should still be tracked in the settlement file (para 17.16).
9. What does a two-working-day exit workflow look like?
It is an off-cycle payroll run with its own timetable. The book lays it out by day (para 17.23):
| Stage | Action |
|---|---|
| Before the last working day | Confirm the last working day, freeze the resignation status, validate attendance, check assets, confirm loans and collect pending reimbursement claims |
| Last working day | Freeze attendance, confirm the leave balance, confirm overtime, finalise wages payable and review deductions |
| Working day 1 after cessation | Approve the wage payable statement, generate the bank payment file and issue a draft settlement statement |
| Working day 2 after cessation | Credit the wages payable, preserve the bank proof and tell the employee the payment has been made |
| After the wage payment | Track leave encashment, bonus, gratuity, incentives, reimbursements and other pending non-wage dues |
The timetable only works if HR, payroll, finance, the reporting manager, IT and administration each own a step, and the book says the process should be tested before the Code is implemented, not after the first exit dispute arises. Where the process has to be written up as an SOP and configured in the payroll system, Taxmann Advisory offers implementation support for compliance SOPs and ERP automation.
Payment should go through a traceable channel. Section 15 permits wages to be paid in coin, currency notes, cheque, bank account credit or electronic mode, subject to any requirement notified by the appropriate Government, and the book recommends bank transfer or electronic mode for every settlement (para 17.24). If a transfer fails because of a wrong or closed account, correct the details and reprocess at once, and keep both the failed and the successful transaction records.
Section 50 requires prescribed records and wage slips. For Central sphere establishments, the Wages (Central) Rules, 2026 require the employee register, wage and deduction records, the attendance register-cum-muster roll and wage slips in the prescribed forms, and they permit electronic records (para 17.25). For State sphere establishments, the corresponding State Rules and forms should be checked (para 17.1). At exit, the employer should issue either a wage slip for the relevant wage period or a separate settlement statement showing the wage period, days paid, components paid, overtime, deductions, net amount and payment reference. Tax deducted at source is one of the statutory deductions on that statement, and for that working Taxmann’s Tools include an Income Tax Calculator under the Income-tax Act, 2025.
The book also gives a model clause for the exit policy (para 17.28):
“The Company shall process wages payable to an employee on resignation, removal, dismissal, retrenchment or closure-related cessation within the time prescribed under the Code on Wages, 2019 and applicable rules. Earned wages payable up to the effective date of cessation shall be prioritised for payment within two working days. Other dues such as leave encashment, statutory bonus, gratuity, incentives, reimbursements, retrenchment compensation and recoveries shall be settled in accordance with applicable law, Company policy and supporting records.”
It should be adapted to the employer’s industry, location, standing orders, appointment terms and the applicable State law.
10. What happens if the settlement is delayed?
The employee can bring a claim. Section 45 provides the mechanism for claims about wages paid below the minimum rate, non-payment of wages, overtime, deductions contrary to the Code and minimum bonus, and the claim authority may order payment of the amount due with compensation, subject to the provisions of the Code (para 17.27). The Central Rules and State Rules prescribe the forms for claims and appeals.
The book’s practical point is that the legal exposure is only part of the cost. A delayed settlement also brings employee dissatisfaction, complaints on social media, inspection risk and reputational damage, and in many cases the amount in dispute is smaller than the cost of the dispute.
Contract workers need a separate check. The contractor generally pays their wages, but under the Occupational Safety, Health and Working Conditions Code, 2020 (the OSHWC Code), a principal employer may have to pay any unpaid balance and recover it from the contractor. The book’s advice is to require worker-wise exit settlement proof whenever contractor workers leave the deployment or the contract ends (para 17.21). For State sphere establishments, the State OSHWC Rules and local contractor wage payment requirements should also be checked.
For an internal review, the book lists sixteen audit questions (para 17.31), starting with whether the effective cessation date is documented and whether wages payable were settled within two working days. Its exit dashboard sets the target for the second at 100 per cent (para 17.32).
11. Quick answers
What is full and final settlement?
It is the settlement of all amounts payable to and recoverable from an employee on leaving employment. Under the Code on Wages, 2019, only the “wages payable” part carries the two-working-day deadline in section 17. Other items follow their own law, policy or scheme terms.
How many days does an employer have to pay full and final settlement under the new labour code?
Section 17 of the Code on Wages, 2019 requires the wages payable to be paid within two working days of removal, dismissal, retrenchment, resignation or closure-related unemployment. Leave encashment, bonus, gratuity and reimbursements are governed by their own law or policy and should be tracked separately.
When do the two working days start for a resignation with notice?
From the last working day or the effective relieving date, not from the date of the resignation letter, because the employee continues in service during the notice period.
Can the full and final settlement be held back until a laptop is returned?
No. Earned wages should be computed and paid on time. Any deduction from wages for a lost or damaged asset must follow section 21 of the Code on Wages, 2019, with an opportunity to show cause, and any balance beyond the deduction limit may need to be recovered separately.
Can notice pay be recovered from the final settlement?
Only where the appointment letter and policy support it, and only within the deduction rules, including the limit of fifty per cent of wages in a wage period under section 18 of the Code on Wages, 2019.
Is statutory bonus paid to an employee who resigns?
It can be. A resigned employee may still be eligible under section 26 of the Code on Wages, 2019 if the eligibility conditions are met. If the annual computation is pending, the settlement statement should show the bonus as payable later as per law.
What happens if full and final settlement is delayed?
Delay in paying the wages payable can lead to a claim under section 45 of the Code on Wages, 2019, and the claim authority may order payment of the amount due along with compensation, subject to the provisions of the Code.
This article draws on Chapter 17 of Taxmann’s HR Guide to Code on Wages by CA Venugopal Gella (2026 Edition), which sets out the exit payroll process with a trigger-date table for nine separation situations, a two-working-day workflow, a model policy clause, sixteen internal audit questions and an exit dashboard. It also draws on the exit settlement mistakes in Chapter 28. Law stated as updated till August 2026.
Labour law Acts and Rules, case laws, circulars and notifications are available on Taxmann.com | Research under Labour Laws.
Related reading: the complete guide to the Code on Wages, 2019 · definition of wages and the 50% rule · bonus, allocable surplus and set-on.
More in this series: wage slip format under the Code on Wages · statutory bonus calculation · new labour code salary structure · overtime rules under the Code on Wages · minimum wages as per the new labour code · principal employer and contractor wage compliance · 34 common payroll mistakes · appointment letter format.
Disclaimer: The content/information published on the website is only for general information of the user and shall not be construed as legal advice. While the Taxmann has exercised reasonable efforts to ensure the veracity of information/content published, Taxmann shall be under no liability in any manner whatsoever for incorrect information, if any.

Taxmann Publications has a dedicated in-house Research & Editorial Team. This team consists of a team of Chartered Accountants, Company Secretaries, and Lawyers. This team works under the guidance and supervision of editor-in-chief Mr Rakesh Bhargava.
The Research and Editorial Team is responsible for developing reliable and accurate content for the readers. The team follows the six-sigma approach to achieve the benchmark of zero error in its publications and research platforms. The team ensures that the following publication guidelines are thoroughly followed while developing the content:
- The statutory material is obtained only from the authorized and reliable sources
- All the latest developments in the judicial and legislative fields are covered
- Prepare the analytical write-ups on current, controversial, and important issues to help the readers to understand the concept and its implications
- Every content published by Taxmann is complete, accurate and lucid
- All evidence-based statements are supported with proper reference to Section, Circular No., Notification No. or citations
- The golden rules of grammar, style and consistency are thoroughly followed
- Font and size that’s easy to read and remain consistent across all imprint and digital publications are applied


CA | CS | CMA