[Analysis] Payment of Wages Act 1936 to the Code on Wages 2019 – Wage Period | Time Limits | Mode and Proof of Payment
- Blog|Labour & Industrial Laws|
- 13 Min Read
The Payment of Wages Act 1936 is repealed. Sections 15 to 17 of the Code on Wages 2019 now set the wage period, payment time limits and mode of payment.
- By Taxmann
- |
- Last Updated on 16 November, 2026

Table of Contents
- Has the Payment of Wages Act, 1936 been replaced by the Code on Wages?
- What changed from the 1936 Act, and what did not?
- What does payment of wages mean under the Code?
- What is the longest wage period allowed under section 16?
- What is the time limit for payment of wages under section 17?
- How should the payroll calendar be built around the due date?
- Can wages be paid in cash under section 15?
- Does timely payment apply to white-collar employees?
- What proof of wage payment should payroll keep?
- What happens when wages are delayed or disputed?
- Quick answers
1. Has the Payment of Wages Act, 1936 been replaced by the Code on Wages?
Yes. Section 69 of the Code on Wages, 2019 repeals the Payment of Wages Act, 1936, the Minimum Wages Act, 1948, the Payment of Bonus Act, 1965 and the Equal Remuneration Act, 1976, subject to the savings provision in that section (para 2.1). Taxmann’s HR Guide to Code on Wages explains that the 1936 Act focused on timely payment and authorised deductions. The Code carries both into Chapter III, with payment of wages in sections 15 to 17 and deductions in sections 18 to 24 (paras 2.3 and 2.5).
The book refers to 21 November 2025 as the date of implementation of the Codes, in reporting the Additional FAQ dated 16 March 2026 on gratuity (para 24.15). Since section 1(3) allows different dates for different provisions, the book advises reading the Code and the rules with the latest commencement notifications for the establishment (para 1.4). The Wages (Central) Rules, 2026 apply to Central sphere establishments, and State sphere establishments should check the applicable State rules.
In principle, the core discipline has not changed: wages must still be paid on time, deductions still cannot be made freely, wage records must still be maintained, and employees can still raise claims for unpaid wages, short-paid wages, deductions and bonus (para 2.10). Policy references to the old wage laws, however, should be replaced with references to the Code (Annexure 2).
Old records may also remain relevant, because section 69 treats anything done or any action taken under the repealed laws as done under the corresponding provisions of the Code, to the extent not contrary to it, until replaced (para 2.12). Old wage registers, deduction records and claim documents should be kept, and on a change of payroll software the old system should not be switched off until its archives are verified (paras 2.12 and 28.24).
2. What changed from the 1936 Act, and what did not?
The principles of timely payment and authorised deductions carried over, but the Code widens wage payment discipline and ties the payroll calendar to statutory due dates. The book calls the practical change significant: wage payment must become a controlled statutory process, and full and final (F&F) settlement cannot remain a slow clearance-driven process (para 2.5). Its Annexure 2 sets the old Act beside the Code:
| Subject | Payment of Wages Act, 1936 | Code on Wages, 2019 | Practical change |
|---|---|---|---|
| Coverage | Regulated payment of wages for specified classes of employed persons; wage ceiling-based coverage, mainly applied to specified employments | Timely payment provisions apply to all employees, including white-collar employees, as clarified in the Additional FAQ dated 16 March 2026 | Apply wage payment discipline across the organisation, not only to factory or lower-paid workers |
| Wage period | Regulated for covered employees | Daily, weekly, fortnightly and monthly wage periods, none exceeding one month | Appointment letter and payroll policy must clearly specify the wage period |
| Time of payment | Payment timelines applied to covered employees | Separate payment timelines for daily, weekly, fortnightly and monthly wage periods | Payroll calendar must be based on the statutory due date |
| Exit payment | Payment on termination was regulated under the wage law framework | The Compliance Handbook for Employers under the Four Labour Codes, published on the Ministry of Labour and Employment’s website, records two-working-day settlement when an employee leaves by resignation, dismissal or termination | Create an off-cycle F&F wage settlement workflow |
| Mode of payment | Payment in prescribed modes, with later amendments enabling bank or electronic payment | Currency, cheque, bank credit or electronic mode, subject to Government directions | Make bank or electronic payment the preferred control and preserve transaction IDs |
| Deductions | Authorised deductions were specified and unauthorised deductions were prohibited | Authorised deductions consolidated, with a 50% deduction cap | Block unsupported deductions and carry forward excess recoveries |
| Claims | Claims could be made for delayed wages and illegal deductions | Consolidated claims for wages, deductions, minimum wages, overtime and bonus | Keep consolidated claim defence records |
| Rules and forms | Separate rules existed under the different old laws | The Central Rules supersede several earlier Central Rules, including the Payment of Wages related rules | Migrate old register and form formats to Code-compliant formats, subject to applicable State Rules |
In the book’s words, the Code “is not merely a renaming of four earlier laws. It changes the way compliance must be managed.” Its practical rule is to move from law-wise compliance to payroll-cycle compliance (Annexure 2).
For CS Executive students, labour laws form part of the paper Setting Up of Business, Industrial and Labour Laws, and Taxmann.com | Students offers the SUBIL Cracker for that paper.
3. What does payment of wages mean under the Code?
It means paying the employee the wages legally payable for the relevant wage period, after any authorised deductions (para 8.3). “Wages” carries its section 2(y) meaning and is not the same as CTC, which may include employer PF contribution, gratuity provision, insurance, bonus provision, performance incentive or welfare cost. As the book puts it, paying CTC on paper is not the same as paying wages.
Section 18 permits no deductions except those authorised under the Code, so salary cannot be reduced informally because the employee missed a target, delayed a report, damaged an asset or resigned without notice (para 8.25). The limits are covered in deductions from wages and the 50 per cent limit.
Variable pay should be examined against the terms of employment and the policy. If an incentive is earned and payable as part of wages for a wage period, delay may create wage payment risk. If it is discretionary, performance-linked and payable only after approval under a separate policy, the policy should state when it is paid (para 8.28).
4. What is the longest wage period allowed under section 16?
One month. Section 16 of the Code requires the employer to fix the wage period as daily, weekly, fortnightly or monthly, and no wage period can be more than one month (para 8.6). Different wage periods may be used for different establishments or employee categories, within that limit (para 8.7).
| Wage period | Practical use, as the book describes it |
|---|---|
| Daily | Daily-rated workers, casual workers, certain site or shift-based arrangements |
| Weekly | Weekly wage arrangements, certain operational categories |
| Fortnightly | Less common, but permitted |
| Monthly | Most common for regular employees |
A factory may, for example, pay daily-rated workers weekly and office staff monthly, if this is properly documented and implemented consistently.
The book calls section 16 a simple provision that is often ignored (para 8.6). Many appointment letters mention a monthly salary but do not clearly define the wage period, and contractors may use one wage period in the invoice and another in the wage register. The wage period should be clear in the appointment letter, payroll policy, wage slip and wage register.
5. What is the time limit for payment of wages under section 17?
It depends on the wage period. Section 17 of the Code deals with the time limit for payment of wages, with a deadline for each wage period and a separate rule for wages payable on exit (paras 8.8 and 8.10):
| Wage period or event | Payment deadline under section 17 |
|---|---|
| Daily | At the end of the shift |
| Weekly | On the last working day of the week, before the weekly holiday |
| Fortnightly | Before the end of the second day after the end of the fortnight |
| Monthly | Before the expiry of the seventh day of the succeeding month |
| Removal, dismissal, retrenchment, resignation, or unemployment due to closure of the establishment | Within two working days, under section 17(2) |
For monthly-paid staff, the salary payment date as per labour law therefore has an outer limit: before the expiry of the seventh day of the following month. An organisation that processes payroll on the tenth day of the next month should review the practice, and where internal approvals cause the delay, the approval process should be moved earlier (paras 8.8 and 8.31).
If the deadline falls on a bank holiday or non-working day, the safer practice is to process payment before the due date, and payroll calendars should be prepared annually with bank and festival holidays in view (para 8.18). Cash flow difficulty is not a defence to delayed wage payment under section 17, because wages are a statutory obligation, and repeated delay in the book’s view indicates a management control failure (para 8.15).
Section 17(2) includes resignation, although many companies assume the two-working-day rule applies only to termination or dismissal (para 8.12). Settling exits after thirty, forty-five or sixty days may not be safe for wages payable under it (para 8.10). The exit process is covered in full and final settlement under the Code on Wages.
6. How should the payroll calendar be built around the due date?
Backwards from the statutory due date. Attendance closing, leave approval, overtime approval, incentive input, deduction upload, payroll verification, bank file approval and payment release should all be completed before the deadline (para 8.8).
Payment of wages depends on HR, operations, payroll, finance, IT and department heads, and the Code does not excuse delay merely because internal approval was pending (para 8.9). The book therefore calls for a written payroll calendar with clear cut-off dates and escalation responsibility, and suggests these controls for a monthly cycle (paras 8.9 and 8.29):
| Activity | Suggested control |
|---|---|
| Attendance cut-off | Fixed date |
| Leave approval closure | Before payroll processing |
| Overtime approval closure | Before payroll processing |
| New joinee input | HR cut-off |
| Exit input | Immediate, not only monthly |
| Salary revision input | Approved before payroll lock |
| Deduction input | Supported by authorisation |
| Payroll processing | Before the statutory deadline |
| Payroll review | Maker-checker control |
| Bank file release | Before the payment due date |
| Wage slip issue | On or before payment |
| Failed payment review | Same day or next working day |
| Register update | After payroll finalisation |
| Management exception report | Monthly |
As an illustration, attendance may be closed on the last calendar day of the month, inputs frozen by the second day, payroll approved by the fourth, the bank file uploaded by the fifth and wage slips issued on or before payment (para 13.7). Internal dates may differ, but the legal outer limit must be respected.
The review step should be a maker-checker process: the maker prepares payroll, and the checker verifies employee count, additions, exits, salary changes, overtime, deductions, bank details and net payout (para 8.30).
Contract labour needs its own line. Rule 11 of the Central Rules requires the proprietor of the establishment to pay the contractor the amount payable in respect of wages of employees engaged through the contractor, in accordance with the Code (para 8.19). Contractor invoices should therefore be processed in line with wage payment timelines, and released only after wage compliance, including worker-wise wage payment proof, has been checked (paras 8.19 and 8.20).
7. Can wages be paid in cash under section 15?
Cash payment may be legally possible where it is not prohibited, but the book treats bank or electronic payment as the preferred and most defensible method (para 8.4). Section 15 of the Code sets out the mode of payment of wages: current coin or currency notes, cheque, credit to the employee’s bank account, or electronic mode. It also permits the appropriate Government to notify establishments where wages must be paid only by cheque or by bank credit.
Cash payment creates evidence issues, while a bank transfer creates a clear audit trail. Where employees do not have bank accounts, the employer should help them open accounts and document the process. Any temporary cash payment should be properly acknowledged, and the employer should make sure that it is permitted for the establishment and category concerned (para 8.5).
8. Does timely payment apply to white-collar employees?
Yes. The Additional FAQ dated 16 March 2026 clarifies that wage protection for timely payment applies to all employees, including white-collar employees (para 16.2). By contrast, the 1936 Act, as Annexure 2 of the book records, had wage ceiling-based coverage and was mainly applied to specified employments.
Section 2(k) points the same way: its definition of employee extends to supervisory, managerial, administrative, technical and clerical work, subject to the exclusions stated in the Code (para 13.2).
The book lists ignoring white-collar employees as a common mistake, which arises when HR teams assume that compliance under the Code applies only to workmen, factory workers or low-paid employees (para 28.19). Its correction is a review by category:
| Category | Review required |
|---|---|
| Managers | Wage payment and F&F |
| Software employees | Salary structure and F&F |
| Finance staff | Wage slips and deductions |
| HR staff | Wage records |
| Sales employees | Commission, minimum wage and deductions |
| Remote employees | Location and wage slip |
| Senior employees | Payment and records |
| Fixed-term employees | Wage, gratuity and F&F |
| Support staff | Minimum wage and overtime |
The practical impact may differ by category, but employees should not be excluded without review. Because of the same clarification, appointment letters should not exclude senior or office employees from wage payment discipline (para 30.6).
9. What proof of wage payment should payroll keep?
Proof of actual payment to each employee. A payroll register may show salary as paid, but in a wage claim payroll processing is not enough, and the employer should prove actual payment (para 28.22). The book lists what to preserve:
| Record | Purpose |
|---|---|
| Bank upload file | Shows payment instruction |
| Bank debit confirmation | Shows employer account debit |
| Employee-wise credit report | Shows employee credit |
| Transaction ID | Payment trace |
| Failed payment report | Exception tracking |
| Reprocessing proof | Correction evidence |
Payroll should not be closed until failed bank credits are resolved or escalated. Where payment is made through digital mode, a lump sum debit from the company bank account is not enough, because employee-wise proof is required (para 8.5).
Failed credits need their own trail: payroll should not treat salary as paid merely because the payment file was uploaded (para 8.5). When a credit fails, for example for a wrong account number, an inactive account, a name mismatch or a frozen account, the payroll team should contact the employee, obtain corrected bank details, reprocess the payment and preserve proof (para 8.17). The book’s failed-payment dashboard follows each case through to the final credit reference.
The records should also agree. If the wage slip shows one figure, the wage register another and the bank proof a third, the employer’s defence becomes weak (para 8.22).
For Central sphere establishments, Rule 52 of the Central Rules requires wage slips in Form V, electronically or in physical form, on or before payment of wages (para 8.21). The format is covered in wage slip format under the Code on Wages. Rule 51 requires the Employee Register in Form I, the Register of Wages, Overtime, Advances, Fines and Deductions for Damage and Loss in Form IV and the Attendance Register-cum-Muster Roll in Form IX. They may be kept electronically or physically and must be preserved for five years after the date of the last entry (para 8.22). State sphere establishments should check the applicable State rules and formats (Annexure 2).
10. What happens when wages are delayed or disputed?
The employee can bring a formal claim. Section 45 of the Code provides the claims mechanism. For Central sphere establishments, Rule 49 prescribes Form II for a single application under section 45(5). Form II covers non-payment of wages for a period as well as wages paid below minimum rates, wages for weekly days of rest, overtime rates and deductions in contravention of the Code (para 8.23). The employer’s defence will depend on wage records, wage slips, bank proof, attendance records, deduction records and communication with the employee.
An appeal against the authority’s order lies under section 49, in Form III under Rule 50 of the Central Rules. Rule 50 also provides that an employer’s appeal shall not be admitted unless the employer deposits the claim amount with the appellate authority at the time of preferring it (para 8.24).
Disputes over notice period, incentives, leave balance, asset recovery or reimbursement should not automatically delay undisputed wages (para 8.26). The book suggests dividing the settlement into three columns: admitted wages payable, which must be paid without delay; lawful deductions or recoveries; and disputed items that need further review. In the same way, a clearance process should help compute lawful dues, not become an informal tool to block wages (para 8.16).
The book offers the following payroll policy clause, subject to legal review (para 8.32):
“The Company shall fix the wage period for employees in accordance with applicable law. Wages shall be paid through bank transfer, electronic mode or such other mode as may be permitted by law. Monthly wages shall be paid within the statutory timeline prescribed under the Code on Wages and applicable Rules. In case of cessation of employment, wages payable under the Code shall be processed within the prescribed timeline, subject only to lawful and documented deductions. Wage slips shall be issued electronically or physically on or before payment of wages. The Company shall maintain payroll records, wage registers, attendance records and payment proof as required under applicable law.”
Where the clause needs adapting for an establishment, Taxmann AI, a legal research and drafting assistant that answers questions against the law, can help prepare the draft for that review.
The book’s twelve internal audit questions (para 8.35), starting with whether the wage period has been formally fixed under section 16, should be part of the monthly payroll audit.
11. Quick answers
Has the Payment of Wages Act, 1936 been replaced?
Yes. Section 69 of the Code on Wages, 2019 repeals the Payment of Wages Act, 1936, subject to the savings provision in that section. Payment of wages is now dealt with in sections 15 to 17 of the Code and deductions in sections 18 to 24.
What is the longest wage period allowed under the Code on Wages?
One month. Section 16 of the Code on Wages, 2019 requires the employer to fix the wage period as daily, weekly, fortnightly or monthly, and no wage period can exceed one month.
By when must monthly wages be paid under the Code on Wages?
Before the expiry of the seventh day of the succeeding month, under section 17 of the Code on Wages, 2019. Daily wages are due at the end of the shift, weekly wages on the last working day of the week, and fortnightly wages before the end of the second day after the end of the fortnight.
What if the salary due date falls on a bank holiday?
Where the payment deadline under section 17 of the Code on Wages, 2019 falls on a bank holiday or non-working day, the safer practice is to process payment before the due date. Payroll calendars should be prepared annually, taking Sundays, bank holidays and festival holidays into account.
Can wages be paid in cash?
Section 15 of the Code on Wages, 2019 permits payment in current coin or currency notes, by cheque, by bank credit or by electronic mode, but the appropriate Government may notify establishments where payment must be only by cheque or bank credit. Bank or electronic payment is preferable because it leaves a clear audit trail.
Does timely payment of wages apply to white-collar employees?
Yes. The Additional FAQ dated 16 March 2026 clarifies that the timely payment provisions of the Code on Wages, 2019 apply to all employees, including white-collar employees.
What proof of wage payment should an employer keep?
The bank upload file, bank debit confirmation, employee-wise credit report, transaction ID, failed payment report and reprocessing proof. A lump sum debit from the company account is not enough, because in a wage claim the employer should prove actual payment to each employee.
This article draws on Chapter 8 of Taxmann’s HR Guide to Code on Wages by CA Venugopal Gella (2026 Edition), which explains sections 15, 16 and 17 with a payroll calendar, a failed-payment dashboard, six worked examples, a model payroll policy clause, a compliance checklist and twelve internal audit questions, and on Annexure 2, which compares the four earlier wage laws with the Code row by row. Law stated as updated till August 2026. The wider position across all four labour codes is covered in Taxmann’s Employer-Employee’s Guide to New Labour Laws.
Labour law Acts and Rules, case laws, circulars and notifications are available on Taxmann.com | Research under Labour Laws.
Related reading: section 69 and what survives the repeal · the complete guide to the Code on Wages, 2019.
More in this series: full and final settlement under the Code on Wages · wage slip format under the Code on Wages · statutory bonus calculation · new labour code salary structure · deductions from wages and the 50% limit · overtime rules under the Code on Wages · minimum wages as per the new labour code.
Disclaimer: The content/information published on the website is only for general information of the user and shall not be construed as legal advice. While the Taxmann has exercised reasonable efforts to ensure the veracity of information/content published, Taxmann shall be under no liability in any manner whatsoever for incorrect information, if any.

Taxmann Publications has a dedicated in-house Research & Editorial Team. This team consists of a team of Chartered Accountants, Company Secretaries, and Lawyers. This team works under the guidance and supervision of editor-in-chief Mr Rakesh Bhargava.
The Research and Editorial Team is responsible for developing reliable and accurate content for the readers. The team follows the six-sigma approach to achieve the benchmark of zero error in its publications and research platforms. The team ensures that the following publication guidelines are thoroughly followed while developing the content:
- The statutory material is obtained only from the authorized and reliable sources
- All the latest developments in the judicial and legislative fields are covered
- Prepare the analytical write-ups on current, controversial, and important issues to help the readers to understand the concept and its implications
- Every content published by Taxmann is complete, accurate and lucid
- All evidence-based statements are supported with proper reference to Section, Circular No., Notification No. or citations
- The golden rules of grammar, style and consistency are thoroughly followed
- Font and size that’s easy to read and remain consistent across all imprint and digital publications are applied


CA | CS | CMA